Communicate with Supplier? Supplier
Andy Cheng Mr. Andy Cheng
What can I do for you?
Chat Now Contact Supplier

Shenzhen Glida Electronics Co., Ltd.

HomeNewsNiMH Battery Pack- Check Voltage Range

NiMH Battery Pack- Check Voltage Range

2020-10-10

Test Your Battery Voltage with a Voltmeter

A voltmeter, which is popular among Rechargeable Batteries, is the next technique.

1)Be sure to remove your battery from the device.

2)Remove the positive terminal cover for the battery. Check for any corrosion in the terminal and clean it off if necessary. You would then want to connect the positive lead on your voltmeter to your battery`s positive lead. After that, following the same steps you did for the positive end, attach the negative voltmeter leading to the negative battery terminal. Now, you`re all set to check the readings on the voltmeter.

3)Check your readings. Usually, a fully charged battery would display a voltmeter reading of around 1.5 volts. That means your battery is in good shape if your voltmeter shows a voltage anywhere between 1.3-1.5 volts.

4)A strong indication that your battery has excessive voltage is any voltage above 1.5volts. Switch on the high beams to reduce excessive surface voltage charges, if that`s the case.

5)Charge your battery if it shows a voltage below 1.3 on the voltmeter. But if the voltmeter reads anything below 1.2 volts, your battery should consider [trickle charging." This simply means that your battery will be charged at a much slower rate, allowing you to avoid the risk of applying excess charge amperage that could cause a lot of excess heat and off-gassing (and explosions in extreme cases).

What is the voltage of a fully charged nimh battery?

It all depends on the battery and the method of charging. Generally, rapid charging generates higher voltages. It is charging Energizer 2100 NiMH AAs in one-hour results, typically in a cell voltage of 1.4-1.45V. However, a 3000 mAh SC pack typically yields a 1.35-1.4V cell voltage after a 2-hour load.

At what voltage is a NiMH battery empty?

The NiMH battery`s discharge voltage profile is called [flat," which varies with the rate and temperature. The voltage starts at around 1.5 volts as a fully charged battery is discharged, followed by a sharp drop to about 1.3 volts. The voltage for about 75 percent of the profile stays between 1.3 and 1.2 volts before a second abrupt decrease in voltage occurs as the battery`s usable power starts and deplete.

At this point, the discharge current (or load) is terminated at a safe voltage level. With high discharge rates, losses in ohmic polarizations (internal resistance) decrease the entire discharge profile. The discharge profile is elevated at high temperatures by increasing the potential (voltage) between the electrodes. Concentration polarisation dramatically reduces the voltage and available power at temperatures below 10 ° C ( 50 ° F). This is triggered by an increase in the energy required inside the battery to move molecules.

For the rated voltage of a NiMH cell, the industry norm is 1.2 volts. This value is the nominal voltage of a cell, which is discharged at a temperature of 25 ° C (77 ° F) at a rate of C/10 to a final voltage of 1.0 volts. The rated voltage of battery packs is mostly used to point out this industry standard.

The Final Verdict

That`s it, what you are up to go and check now the voltage of your NiMH battery!

NiMH Batteries have several benefits, which operate on the same 1.2 volts, which are much greater. These batteries are even more environmentally conscious than others. Hopefully, this detailed guide on how to check NiMH battery voltage, the voltage of a fully charged battery, and what voltage NIMH battery are empty will enrich your knowledge.


Shenzhen Glida Electronics Co., Ltd.
Business Type:Manufacturer , Distributor/Wholesaler , Organization
Product Range:Chargers,Batteries & Power Supplies , Lithium Ion Batteries , Lithium Ion Batteries
Products/Service:Rechargeable Batteries , Li-ion Batteries , NiMH Batteries , Polymer Lithium Battery , 18650 Battery , LFP Battery Packs
Certificate:ISO/TS16949 , ISO14001 , ISO9001 , CB , CCC , CE , FCC , FDA , GS , MSDS , PSE , REACH , RoHS , S-Mark , SSA , Test Report , VDE , EMC , ETL , TUV , UL
Company Address:Building C,Huanyu Industrial Park,Xuezi Road,Bao'an District, Shenzhen City,China, Shenzhen, Guangdong, China

Previous: 2020 China OEM/ODM lithium battery, Polymer lithium battery, Ni-Mh batteries Manufacture

Next: The World's Leading Manufacturer Of Custom Lithium Ion Battery Pack

Related Products List

Home

Phone

About Us

Inquiry